|
For Windows XP Users
- Please see operating system documentation for other versions
of Windows
1.
Open
your web browser, and enter 192.168.1.225 (the IP address
of the Wireless Ethernet Bridge).
Press the Enter key, and the screen shown below.
2.
In
lowercase letters, enter admin in the Password
field (the default password is admin). Click the OK
button.
The Utility’s Setup screen will appear.
3.
Scroll down until you see SSID. Type sboca into the
SSID field.
4.
At bottom of page, click Apply.
5.
Check to see that the WLAN light is now active.
5.
Close your browser. |
